SIMULATION OF IOT MONITORING OF SOIL MOISTURE AND TEMPERATURE USING ARDUINO UNO ON TINKERCAD USING RULE-BASED ALGORITHMS
Isi Artikel Utama
Abstrak
Farmers and plant enthusiasts often face difficulties in maintaining the desired soil moisture level, as manual watering methods are usually ineffective and unstable. Too much or too little water can have a significant impact on plant growth. To resolve this issue, a study was conducted with the aim of designing and testing an automated system capable of monitoring soil moisture and temperature levels. This study adopted a Research and Development (R&D) approach, which was demonstrated in the form of a simulation in Tinkercad. The system was built using an Arduino Uno microcontroller, along with soil moisture and temperature sensors, as well as control logic based on rule-based (if-then) algorithms. Testing showed that this virtual prototype functioned as intended. This system can automatically activate the water pump when the sensor detects dry soil conditions (sensor value < 450) and stop it when the soil is moist or wet. Also, this setup effectively turns on the LED when it gets hotter than what we told it to watch out for (more than 32°C). The data we got tells us that this monitoring setup does its job well and is really good at doing things automatically based on the rules we set, which means it's a great way to solve the problems we have with watering plants by hand.
Rincian Artikel
Artikel ini berlisensiCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright (c) STMIK TIMEReferensi
[1] A. Roihan, A. Mardiansyah, A. Pratama, and A. A. Pangestu, “Simulasi Pendeteksi Kelembaban Pada Tanah Menggunakan Sensor Dht22 Dengan Proteus,” Method. J. Tek. Inform. dan Sist. Inf., vol. 7, no. 1, pp. 25–30, 2021, doi: 10.46880/mtk.v7i1.260.
[2] F. Nuni Dea Rustanti and R. Zainul Abidin, “SISTEM MONITORING KADAR KETERSEDIAAN AIR PADA TANAMAN ANGGREK MENGGUNAKAN SENSOR SOIL MOISTURE BERBASIS INTERNET OF THINGS (IoT),” JATI (Jurnal Mhs. Tek. Inform., vol. 8, no. 5, pp. 10197–10203, Sep. 2024, doi: 10.36040/jati.v8i5.11012.
[3] E. Nurcahyani and A. P. Sabatini, “Respon Planlet Anggrek Cattleya sp. Hasil Seleksi In Vitro Terhadap Cekaman Kekeringan dengan Polietilenglikol (PEG) 6000,” Indones. J. Biotechnol. Biodivers., vol. 6, no. 2, pp. 61–67, 2022.
[4] S. Sutono and F. Al Anwar, “Perancangan dan Implementasi Smartlamp berbasis Arduino Uno dengan menggunakan Smartphone Android,” Media J. Inform., vol. 11, no. 2, p. 36, 2020, doi: 10.35194/mji.v11i2.1036.
[5] E. M. Punuh, “Rancang Bangun Sensor Parkir Kendaraan Roda Empat Berbasis Mikrokontroler Arduino Uno,” Jambura J. Electr. Electron. Eng., vol. 6, no. 1, pp. 18–24, Jan. 2024, doi: 10.37905/jjeee.v6i1.22171.
[6] H. Marcos and H. Muzaki, “Monitoring Suhu Udara Dan Kelembaban Tanah Pada Budidaya Tanaman Pepaya,” J. Teknol. dan Sist. Tertanam, vol. 3, no. 2, 2022, doi: 10.33365/jtst.v3i2.2200.
[7] B. N. Mohapatra, R. K. Mohapatra, J. Joshi, and S. Zagade, “Easy Performance Based Learning Of ArduinoAnd Sensors through Tinkercad,” Int. J. Open Inf. Technol., vol. 8, no. 10, pp. 73–76, 2020, [Online]. Available: http://injoit.org/index.php/j1/article/view/977
[8] S. Kumar, P. Tiwari, and M. Zymbler, “Internet of Things is a revolutionary approach for future technology enhancement: a review,” J. Big Data, vol. 6, no. 1, p. 111, Dec. 2019, doi: 10.1186/s40537-019-0268-2.
[9] J. van der Waa, E. Nieuwburg, A. Cremers, and M. Neerincx, “Evaluating XAI: A comparison of rule-based and example-based explanations,” Artif. Intell., vol. 291, p. 103404, Feb. 2021, doi: 10.1016/j.artint.2020.103404.
[10] B. Muqdamien, U. Umayah, J. Juhri, and D. P. Raraswaty, “TAHAP DEFINISI DALAM FOUR-D MODEL PADA PENELITIAN RESEARCH & DEVELOPMENT (R&D) ALAT PERAGA EDUKASI ULAR TANGGA UNTUK MENINGKATKAN PENGETAHUAN SAINS DAN MATEMATIKA ANAK USIA 5-6 TAHUN,” Intersections, vol. 6, no. 1, pp. 23–33, Feb. 2021, doi: 10.47200/intersections.v6i1.589.
[11] S. Sufaidah, E. Lilawati, F. Arya Dinta, K. Khofifah, E. B. Wijanarko, and D. Cahyaningtyas, “Sosialisasi Program Penyiraman Tanaman Hias Secara Otomatis Berbasis Arduino,” Jumat Inform. J. Pengabdi. Masy., vol. 5, no. 1, pp. 36–44, Jun. 2024, doi: 10.32764/abdimasif.v5i1.4243.
[12] R. Muttaqin, W. S. W. Prayitno, N. E. Setyaningsih, and U. Nurbaiti, "Rancang Bangun Sistem Pemantauan Kualitas Udara Berbasis Iot (Internet Of Things) dengan Sensor DHT11 dan Sensor MQ135," Jurnal Pengelolaan Laboratorium Pendidikan, vol. 6, no. 2, pp. 102-115, May. 2024. https://doi.org/10.14710/jplp.6.2.102-115
[13] A. P. Nanda, J. Jeprianto, and M. I. Mahdi, “SISTEM OTOMATIS PENYIRAMAN TANAMAN BERBASIS SENSOR KELEMBAPAN TANAH UNTUK PENINGKATAN PRODUKTIVITAS PERTANIAN,” Technol. J. Ilm., vol. 15, no. 4, p. 764, Oct. 2024, doi: 10.31602/tji.v15i4.16300.
[14] E. Tenda, Eric Alfonsius, Megastin M. Lumembang, dan Eliasta Ketaren, “EARLY WARNING SYSTEM UNTUK POTENSI BENCANA LONGSOR DIKOTA MANADO BERBASIS INTERNET OF THINGS”, JTM, vol. 12, no. 2, hlm. 64–70, Des 2023.
[15] A. L. Kalua, J. Ramadhan Kaplale, N. Klarissa Ribka Mapalie, I. Syagitsyah Iriansu, dan E. Ketaren, “PENGEMBANGAN ALAT TES KESAMAPTAAN TNI/POLRI BERBASIS TEKNOLOGI COMPUTER VISION DAN IOT DENGAN METODE POSE ESTIMATION MENGGUNAKAN PYTHON”, JTM, vol. 13, no. 2, hlm. 294–299, Des 2024.